MIL-DTL-8777E

作者:标准资料网 时间:2024-05-26 06:20:39   浏览:9233   来源:标准资料网
下载地址: 点击此处下载
MIL-DTL-8777E, WIRE, ELECTRICAL, SILICONE-INSULATED, COPPER, 600-VOLT, 200 DEGREES C (21 MAY 2007) [SUPERSEDING MIL-W-8777C]., This specification covers single conductor wire with a silicone primary insulation capable of continuous operation at 600 volts and a maximum conductor temperature of 200 degrees C (392 degrees F). These wires are suitable for use in aircraft and missiles using any combination of electrical loading and ambient temperature, provided the maximum conductor temperature is not exceeded. The wires covered by this specification are not intended as fire-resistant wires.
下载地址: 点击此处下载
基本信息
标准名称:煤的塑性测定 恒力矩吉氏塑性仪法
英文名称:Determination of plastic properties of coal—Constant torque Gieseler plastometer method
中标分类: 矿业 >> 固体燃料矿 >> 煤炭分析方法
ICS分类: 采矿和矿产品 >> 煤
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2010-09-26
实施日期:2011-02-01
首发日期:2010-09-26
作废日期:
主管部门:中国煤炭工业协会
提出单位:中国煤炭工业协会
归口单位:全国煤炭标准化技术委员会
起草单位:煤炭科学研究总院煤炭分析实验室
起草人:王丽华、孔令坡
出版社:中国标准出版社
出版日期:2011-02-01
页数:16页
适用范围

  本标准规定了用恒力矩吉氏仪测定煤的塑性的术语和定义、方法提要、仪器设备、标定、试样、测定步骤、结果表达和方法精密度。本标准适用于烟煤。

前言

没有内容

目录

没有内容

引用标准

下列文件中的条款通过本标准的引用而成为本标准的条款。凡是注日期的引用文件,其随后所有的修改单(不包括勘误的内容)或修订版均不适用于本标准,然而,鼓励根据本标准达成协议的各方研究是否可使用这些文件的最新版本。凡是不注日期的引用文件,其最新版本适用于本标准。
GB/T474 煤样的制备方法(GB474—2008,ISO18283:2006,Hardcoalandcoke—Manualsampling,MOD)
GB475 商品煤样人工采取方法(GB475—2008,ISO18283:2006,Hardcoalandcoke—Manualsampling,MOD)
GB/T19494.1 煤炭机械化采样 第1部分:采样方法(GB/T19494.1—2004,ISO13909-1:2001Hardcoalandcoke—Mechanicalsampling—Part1:Generalintroduction;ISO13909-2:2001Hardcoalandcoke—Mechanicalsampling—Part2:Coal—samplingfrom movingstreams;ISO13909-3:2001Hardcoalandcoke—Mechanicalsampling—Part3:Coal—samplingfromstationarylots,NEQ)
GB/T19494.2 煤炭机械化采样 第2部分:煤样的制备(GB/T19494.2—2004,ISO13909-1:2001Hardcoalandcoke—Mechanicalsampling—Part1:Generalintroduction;ISO13909-4:2001Hardcoalandcoke—Mechanicalsampling—Part4:Coal—Preparationoftestsamples,NEQ)

所属分类: 矿业 固体燃料矿 煤炭分析方法 采矿和矿产品 煤
【英文标准名称】:Toolsformoulding-Ejectorsleeveswithcylindricalhead-Basicseriesforgeneralpurposes
【原文标准名称】:模具.圆柱头推管.一般用途的基本系列
【标准号】:BSISO8405-1998
【标准状态】:现行
【国别】:英国
【发布日期】:1999-02-15
【实施或试行日期】:1999-02-15
【发布单位】:英国标准学会(GB-BSI)
【起草单位】:BSI
【标准类型】:()
【标准水平】:()
【中文主题词】:直径;元部件;材料强度;圆柱形;铸模设备;钢;尺寸;喷射铸造法;名称与符号;硬度;顶杆套筒;机床部件;套筒;组件;长度;机床;粗糙度(表面);尺寸公差;模制
【英文主题词】:Components;Compressionmoulds;Design;Designations;Diecasting;Dimensions;Ejectorsleeves;Ejectors;Foundryengineering;Injectionmoulds;Machinetools;Materials;Mouldingequipment;Pressurediecastingmoulds;Shape;Sleeves;Specification(approval);Tools
【摘要】:Dimensionsofejectorsleevesintendedforuseindiecastandmouldbases.
【中国标准分类号】:J46
【国际标准分类号】:25_120_30
【页数】:10P.;A4
【正文语种】:英语